b-132 apem www.apem.com b pba series piezo switches distinctive features - specifications - overview ? ? sealed to ip 68 (switches mounted on panel) ? ? easy to clean metal surface ? ? long life ? ? ring or dot illumination electrical specifications ?rated voltage : 5v to 24 vac/dc max. ?rated current : 0,2a to 1a max. ?switch resistance on : 10 max. ?switch resistance off : 5m min. ?switch capacitance : 25pf ?led : 20ma 5vdc general specifications ?operating force : 2 to 6n ?life expectancy : 50 million cycles ?operating temperature : -40? to +75? ?emc compatibility according to en 61058-1 for the whole range ?emc compatibility according to en 61000-4 & en61000-6-2 for model 1a (code 002) ?sealing : ip 68 per iec 529 (switches mounted on panel) materials ?case : aluminium, anodized or stainless steel ?terminals : multi-wire leads awg24, length 300 mm (11.81) standard hardware supplied : 1 hex nut u4116 (19 mm ac. flats) or 1 hex nut u6440 (25 mm across flats) packaging unit : bushing 16 (.629) : 40 pieces bushing 22 (.866) : 20 pieces dimensions : first dimensions are in mm while inches are shown as bracketted numbers. pba series terminals f wire leads colours / materials 0 natural anodized 1 blue anodized 2 black anodized 3 green anodized 5 gold anodized 6 red anodized 9 stainless steel* * non-illuminated only ratings 000 200ma 24vac/dc (std) 002 1a 24vac / dc electrical function a no (pulse) bushing / operator r1 bushing 16 (.629), flat r2 bushing 22 (.866), flat (dot illumination only) r5 bushing 16 (.629), with chamfer (non-illum. only) r6 bushing 22 (.866), with chamfer (dot illumination only) led colours blank non-illuminated 16 with illuminated ring a0b blue a0g green a0s red a0y amber 22 mm with illuminated dot l0b blue l0g green l0s red l0y amber lsg red/green notice : please note that not all combinations of above numbers are available. refer to the following pages for further information.
- + apem www.apem.com b-133 pba series piezo switches bushing 16 (.629) - illuminated and non-illuminated b model structure ?panel cut-out : 16,2 mm (.637) ?operator 18 mm (.708) illuminated non-illuminated 000 with illuminated ring flat operator pbar1af (.708dia) ?18.00 (.177) 4.50 (.197) 5.00 awg24 ?16x1 si (.630diax1 is) (.787) 20.00 pba non-illuminated flat operator pbar1af with chamfer pbar5af 20.00 (.787) (.630diax1 is) ?6x1 si awg24 5.00 (.197) 4.50 (.177) ?8.00 (.708dia) (.512dia) ?3.00 case colours / materials 000 0 : natural anodized aluminium - 1 : blue anodized alum. - 2 : black anodized alum. - 3 : green anodized alum. 5 : gold anodized alum. - 6 : red anodized alum. - 9 : stainless steel (non-illum. only) led colours 000 blank : non-illuminated a0b : blue - a0g : green - a0s : red - a0y : amber wire colours : red : contact, yellow : led anode (+), blue : led cathode (-)
b-134 apem www.apem.com pba series piezo switches bushing 22 (.866) - illuminated and non-illuminated b model structure ?panel cut-out : 22,2 mm (.874) ?operator 28 mm (1.102) 000 - + with illuminated dot flat operator pbar2af with chamfer pbar6af ?22x1 si (.866diax1 is) (.256) 6.50 ( .118dia) led ?3.00 ?22.00 3.00 19.50 3.00 ?28.00 8.20 5.00 push zone push zone (.866dia) (.118) (.323) (.768) (.197) (.118) (1.102dia) awg24 non-illuminated flat operator pbar2af with chamfer pbar6af (.866dia) ?2.00 ?2x1 si (.866diax1 is) ?8.00 3.00 19.50 5.00 awg24 (.768) (.118) (.197) (1.102dia) ?0.70 (.815dia) case colours / materials 000 0 : natural anodized aluminium - 1 : blue anodized alum. - 2 : black anodized alum. - 3 : green anodized alum. 5 : gold anodized alum. - 6 : red anodized alum. - 9 : stainless steel (non-illum. only) led colours 000 blank : non-illuminated l0b : blue - l0g : green - l0s : red - l0y : amber - lsg : red/green wire colours : red : contact, yellow : led anode (+), blue : led cathode (-) illuminated non-illuminated
|
